In a message dated 9/1/98 12:02:27 PM Eastern Daylight Time,
vmichael@tibco.com writes:
> I'm having trouble isolating this problem with my headlamps. The
> problem is this: I have working "dipped" beams but my "main" beams are
> inoperative. Everything works as expected except when my main light
> switch is on and the dimmer is fully forward, the headlights do not
> work. Pulling the dimmer toward me, the blue warning light and the
> dipped beams come on.
>
I would check your fuse block and clean the contacts if neccesary. Also
check your ground for the high beams. I had trouble with my high beams and I
found that it was a bad ground.
Tom
|