spitfires
[Top] [All Lists]

Re: [Fwd: Dashpot filler?]

To: ctschmitz@CCGATE.HAC.COM
Subject: Re: [Fwd: Dashpot filler?]
From: Vic Whitmore <vicwhit@idirect.com>
Date: Fri, 29 May 1998 08:22:50 -0400
I've vacuum tested the unit and it works properly (maximum throw at
about 20 psi on the Mighty Vac). I tend to agree that it could be
varnish crystals although I've never seen anything like that before.
Vic W.

ctschmitz@CCGATE.HAC.COM wrote:
> 
> 
> Vic -
> 
> I don't think it's any kind of moisture absorption material! Does your vacuum
> advance work? Suck on the port - you should feel resistance. If not, then the
> brown stuff may be what's left of your diaphragm. If the diaphragm is intact
> then it could be an accumulation of gas vapors that have turned to varnish
> crystals in the vacuum chamber.
> 
> Tom
> 
> ______________________________ Reply Separator 
>_________________________________
> Subject: [Fwd: Dashpot filler?]
> Author:  Vic Whitmore <vicwhit@idirect.com> at CCGATE
> Date:    5/28/98 8:00 AM
> 
> This is a multi-part message in MIME format.
> --------------779B21D95C06D65D7F66D511
> Content-Type: text/plain; charset=us-ascii
> Content-Transfer-Encoding: 7bit
> 
> I sent this request to the Spitfire list and got no takers on the
> response. Anyone care to jump in? Please respond direct or to the
> Spitfire list (I dropped the Triumph list).
> 
> Thanks
> 
> Vic W.
> --------------779B21D95C06D65D7F66D511
> Content-Type: message/rfc822
> Content-Transfer-Encoding: 7bit
> Content-Disposition: inline
> 
> Message-ID: <356AB37B.A38B062A@idirect.com>
> Date: Tue, 26 May 1998 08:20:11 -0400
> From: Vic Whitmore <vicwhit@idirect.com>
> X-Mailer: Mozilla 4.04 [en] (Win95; I)
> MIME-Version: 1.0
> To: Spitfires Maillist <spitfires@autox.team.net>
> Subject: Dashpot filler?
> Content-Type: text/plain; charset=us-ascii
> Content-Transfer-Encoding: 7bit
> 
> I have succumbed to a minor case of shipwrights disease. I was cleaning
> up the distributor and removed the dashpot. While cleaning it, brown
> granular powder came out of the vacuum opening. Tapping it seemed to
> dislodge more of the powder. I'm guessing that this is some kind if
> moisture absorption material. Anyone care to jump in on this one and
> shed some light?
> 
> Vic Whitmore
> 76 Spitfire
> Thornhill, Ontario
> 
> --------------779B21D95C06D65D7F66D511--
>

<Prev in Thread] Current Thread [Next in Thread>