Yep. Piece of cake.
Dave
-----Original Message-----
From: shotimes-admin@autox.team.net
[mailto:shotimes-admin@autox.team.net] On Behalf Of krazgeo@comcast.net
Sent: Monday, July 10, 2006 4:12 AM
To: shotimes@autox.team.net; SHOTimes
Subject: Re: [Shotimes] being put out to stud
Install it yourself on the car, with the wheel removed, so that you can
see more easily the progress of the seating of the stud. Hammer the old
one out from the front, and install the new one from the back. Use the
lug nut upside down so that the larger top side of the nut takes the
load, rather than the smaller tapered shoulder. Tighten until it seats.
Then install the wheel and tighten to specs as above. (Flip the nut
right side up...but you knew to do that, right?)
You can check torque again in a day or so, but I'll bet it won't have
changed.
George
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net http://www.team.net/mailman/listinfo/shotimes
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes
|