I know you don't want to use solid-state relays, so the slow
electrical-switching characteristics of a mechanical switch might not be ideal,
either, for longevity.
The relays are also a safety feature. Don't want 90V sitting on the light
switch should a module component fail.
David
-----Original Message-----
>From: clubairth@bellsouth.net
>Sent: Jun 24, 2006 1:42 PM
>To: shotimes@autox.team.net
>Subject: [Shotimes] OT: HID's and Headlight Relays?
>
>Sorry for the OT but lighting is kind of a SHO issue! At least it is for me!
>
> Do HID headlamps need headlight relays? Would they work better with relays?
>The HID uses much less power, about 35W is somewhat standard. Regular
>Halogen lights are usually 55W and up. The ballast inside the HID takes care
>of firing off the high voltage start up pulse. I know on my SHO the relays
>made a noticeable difference before I upgraded the bulbs.
>
> This came up on my wife's Lincoln LS. The factory HID option has relays
>installed in the under hood power distribution box. If the car has
>conventional Halogen lighting from the factory then no relays. The spot is
>there for the relay but no sockets.
> But people like me have been upgrading our cars by just plugging in the HID
>to the stock wiring with no problems. Everything seems to work fine? Now as
>cheap as Ford/Lincoln is I know those relays are in there for a reason!
>.
>.
>_______________________________________________
>Shotimes mailing list
>Shotimes@autox.team.net
>http://www.team.net/mailman/listinfo/shotimes
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes
|