Jim - that would probably be exactly what I need. Time to walk the aisles at my
local hardware store...
Tom Coradeschi
tjcora@icloud.com
> On Nov 9, 2020, at 8:19 AM, Jim Franklin <jamesf@groupwbench.org> wrote:
>
> SImilar to this, I have a window scraper with an angled handle, thta
> accetpts a single edge razor.
>
> I had my house foamed in a similar fashion but I left it. I do not envy you!
> There's probably a market for pre-cast foam to sit in between I-joists,
> thought that would demand precise framing and, well...
>
> jim
>
>> On Nov 8, 2020, at 2:22 PM, Donald H Locker <dhlocker@comcast.net> wrote:
>>
>> I'm not sure which direction you need the offset, but have you
>> considered attaching a handle from (e.g.) a mason's trowel to a blade
>> holder? Or even just honing the trowel edge to a useful sharpness?
>> Perhaps countersink some flathead screws into the face of the trowel and
>> use flat washers on top (with wingnuts or such) to clamp the blade?
>>
>> Just throwing out ideas here.
>> Donald.
>> --
>> *Plain Text* email -- it's an accessibility issue
>> () no proprietary attachments; no html mail
>> /\ <https://www.georgedillon.com/web/html_email_is_evil.shtml>
>>
>>> On 2020-11-08 12:02 p.m., Thomas Coradeschi wrote:
>>> All: I am in the process of adding foam insulation to the band joist (in
>>> the joist bays) in my basement. The joists are laminated I-beams, so I am
>>> cutting rectangular blocks of 2â?? foam, and using low expansion foam to
>>> fill the gaps and air seal it all.
>>>
>>> Even with the low E foam, it still ends up oozing out of the gaps, and
>>> looks pretty cheesy, according to the homeowner. It cleans up nicely with a
>>> single edge razor blade, but my knuckles will be a bloody mess (there is a
>>> total of about 150â?? of perimeter) if I canâ??t find a way to trim flush
>>> with something other than the standard blade holder.
>>>
>>> So, I am looking for a holder for either single edge razor blades or
>>> drywall knife blades which allows me to trim flush with some sort of an
>>> offset handle. Iâ??ve look at the box store and Grainger websites, nothing
>>> to be found there.
>>>
>>> Hoping someone has some ideas!
>>>
>>> Thanks...
>>>
>>> Tom Coradeschi
>>> tjcora@icloud.com
>>>
>>> _______________________________________________
>>>
>>> Shop-talk@autox.team.net
>>> Donate: http://www.team.net/donate.html
>>> Suggested annual donation $12.96
>>> Archive: http://www.team.net/pipermail/shop-talk
>>> http://autox.team.net/archive
>>>
>>> Unsubscribe/Manage:
>>> http://autox.team.net/mailman/options/shop-talk/dhlocker@comcast.net
>>>
>> _______________________________________________
>>
>> Shop-talk@autox.team.net
>> Donate: http://www.team.net/donate.html
>> Suggested annual donation $12.96
>> Archive: http://www.team.net/pipermail/shop-talk
>> http://autox.team.net/archive
>>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/shop-talk/jamesf@groupwbench.org
>>
>
> _______________________________________________
>
> Shop-talk@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.96
> Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/shop-talk/tjcora@icloud.com
>
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
Unsubscribe/Manage:
http://autox.team.net/mailman/options/shop-talk/mharc@autox.team.net
|