Re: [Shop-talk] Offset handle cutting tools

[Donald H Locker <dhlocker@comcast.net>]

I'm not sure which direction you need the offset, but have you
considered attaching a handle from (e.g.) a mason's trowel to a blade
holder? Or even just honing the trowel edge to a useful sharpness?
Perhaps countersink some flathead screws into the face of the trowel and
use flat washers on top (with wingnuts or such) to clamp the blade?

Just throwing out ideas here.
Donald.
--
*Plain Text* email -- it's an accessibility issue
() no proprietary attachments; no html mail
/\ <https://www.georgedillon.com/web/html_email_is_evil.shtml>

On 2020-11-08 12:02 p.m., Thomas Coradeschi wrote:
> All: I am in the process of adding foam insulation to the band joist (in the 
> joist bays) in my basement. The joists are laminated I-beams, so I am cutting 
> rectangular blocks of 2â?? foam, and using low expansion foam to fill the 
> gaps and air seal it all. 
> 
> Even with the low E foam, it still ends up oozing out of the gaps, and looks 
> pretty cheesy, according to the homeowner. It cleans up nicely with a single 
> edge razor blade, but my knuckles will be a bloody mess (there is a total of 
> about 150â?? of perimeter) if I canâ??t find a way to trim flush with 
> something other than the standard blade holder. 
> 
> So, I am looking for a holder for either single edge razor blades or drywall 
> knife blades which allows me to trim flush with some sort of an offset 
> handle. Iâ??ve look at the box store and Grainger websites, nothing to be 
> found there. 
> 
> Hoping someone has some ideas!
> 
> Thanks...
> 
> Tom Coradeschi
> tjcora@icloud.com
> 
> _______________________________________________
> 
> Shop-talk@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
> 
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/shop-talk/dhlocker@comcast.net
> 
_______________________________________________

Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive

Unsubscribe/Manage: 
http://autox.team.net/mailman/options/shop-talk/mharc@autox.team.net