I agree polycarbonate is probably what you need. I would check with my
local full service glass place; they may give you a piece since what you
need is essentially a scrap.
On 4/25/2016 5:00 AM, Jeff Scarbrough wrote:
> I've used Interstate Plastics in the past for various things. Looks
> like this might work, although my connection is too slow this morning
> to get a price:
>
> https://www.interstateplastics.com/Acrylic-Cear-Bullet-Resistant-Sar-level-1-Sheet-ACRE1CPSHdead.php
>
> Jeff Scarbrough
> Corrosion Acres, Ga.
>
> On Sun, Apr 24, 2016 at 6:51 PM, <eric@megageek.com> wrote:
>> I have a soda machine that I'm about to put back in service after restoring
>> it. It will be out in the general public.
>>
>> The last piece I need is a small (about 1" high by 5" wide) piece of
>> plexiglass that is 'vandal proof' (or whatever term they use.)
>>
>> This will cover the LED readout, so it needs to be semi-clear. If you look
>> at any modern vending machine, they all have them. Most a tinted 'blueish'
>>
>> Then I need to glue it to the plastic frame (this is how the original one
>> was done.
>>
>> Two questions...
>>
>> Where can plexiglass, and what type of glue (and source) do I use?
>>
>> TIA
>>
>> Sent from my Commodore 64 on a 2400 Baud Modem.
>> Eric P
>> "Be as beneficent as the sun or the sea, but if your rights as a rational
>> being are trenched on, die on the first inch of your territory." Ralph Waldo
>> Emerson
>> _______________________________________________
>>
>> Shop-talk@autox.team.net
>> Donate: http://www.team.net/donate.html
>> Suggested annual donation $12.96
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/shop-talk/fishplate@gmail.com
>>
>>
> _______________________________________________
>
> Shop-talk@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/shop-talk/cavanadd@frontier.com
>
>
_______________________________________________
Shop-talk@autox.team.net
Archive: http://www.team.net/archive
|