I've used Interstate Plastics in the past for various things. Looks
like this might work, although my connection is too slow this morning
to get a price:
https://www.interstateplastics.com/Acrylic-Cear-Bullet-Resistant-Sar-level-1-Sheet-ACRE1CPSHdead.php
Jeff Scarbrough
Corrosion Acres, Ga.
On Sun, Apr 24, 2016 at 6:51 PM, <eric@megageek.com> wrote:
>
> I have a soda machine that I'm about to put back in service after restoring
> it. It will be out in the general public.
>
> The last piece I need is a small (about 1" high by 5" wide) piece of
> plexiglass that is 'vandal proof' (or whatever term they use.)
>
> This will cover the LED readout, so it needs to be semi-clear. If you look
> at any modern vending machine, they all have them. Most a tinted 'blueish'
>
> Then I need to glue it to the plastic frame (this is how the original one
> was done.
>
> Two questions...
>
> Where can plexiglass, and what type of glue (and source) do I use?
>
> TIA
>
> Sent from my Commodore 64 on a 2400 Baud Modem.
> Eric P
> "Be as beneficent as the sun or the sea, but if your rights as a rational
> being are trenched on, die on the first inch of your territory." Ralph Waldo
> Emerson
> _______________________________________________
>
> Shop-talk@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/shop-talk/fishplate@gmail.com
>
>
_______________________________________________
Shop-talk@autox.team.net
Archive: http://www.team.net/archive
|