http://www.amazon.com/Shaft-Adapter-Sleeve-Predator-Pulley/dp/B00T6V3TS4
On Fri, Nov 6, 2015 at 10:07 AM, john niolon <jniolon@att.net> wrote:
> Good Morning Group...
>
> hereb s a thinking project for you this a.m.
>
> I have a 5hp Tecumseh engine thatb s giving up the ghost.. horizontal keyed
> shaft 1b diameter... it attaches directly to a vacuum unit (leaves) with
> an
> impeller with the same sized hole (of course).
>
> Every 5 hp engine Ib ve found is supplied with a 3/4b shaft... still
> searching for a 1b shaft engine but Ib m wondering if I could make a
> sleeve
> with a 1/8b wall thickness that I could use... I understand Ib d need a
> b thickerb key and that not be a big deal to make... what do you guys
> think about the sleeve... I could probably find a section of black pipe
> with
> close dimensions and make one...
>
> top speed is 3600 rpm at the shaft I think...
>
> think itb s doable ?? OR does anyone know of a manufactured shaft
> b sleeveb that I can buy ??
>
> thanks
> ]John
> _______________________________________________
>
> Shop-talk@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/shop-talk/jdinnis@gmail.com
>
>
--
=================================
= Never offend people with style when you =
= can offend with substance --- Sam Brown =
=================================
_______________________________________________
Shop-talk@autox.team.net
Archive: http://www.team.net/archive
|