Nylocks are not spec'ed to be reusable, so if you had to tweak them a
bit, they may have not been able to lock as designed. I know it is
redundant, but thread locker can be used with lock nuts of any type
"just to be sure"
Peace,
Pat
Thusly spake Tim
> On the linkage kit for my Weber carbs, there are nylocks that hold the
> bolts that hold the dog bones to the linkage arms. Yesterday I lost one
> of the nylocks and thus the linkage came loose. (A very scary situation
> with an engine with less than 500 miles on it suddenly not running very
> well!!! Thankfully it was easily diagnosed and fixed enough to get
> home!)
>
> Has anyone ever experienced a nylock failing to hold or backing off?
> These were new when they were installed.
>
> Since these connections need to be loose with no binding, should I go
> with a couple jam nuts locked together on each bolt instead of nylocks
> or just stick with nylocks and carry extras?
>
> Thanks
>
> tim
> _______________________________________________
>
> Shop-talk@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/shop-talk/pat@hornesystemstx.com
>
>
>
Pat Horne, Owner, Horne Systems
(512) 797-7501 Voice & Text 5026 FM 2001
Pat@HorneSystemsTx.com Lockhart, TX 78644-4443
www.hornesystemstx.com
-- We support Habitat for Humanity - a hand UP, not a hand OUT --
_______________________________________________
Shop-talk@autox.team.net
Archive: http://www.team.net/archive
|