How warm (hot) does the linkage get? I suspect that nylock nuts will loose
their grip if they get hot enough to soften the plastic insert.
There is a different version that uses a deformed section of thread instead
of the plastic insert. I think Stiff Nut is a trade name.
http://mgaguru.com/mgtech/restore/rt104d.htm
Eric Russell
Mebane, NC
----- Original Message -----
From: "Tim" <tputland@charter.net>
To: "Shop Talk" <shop-talk@autox.team.net>
Sent: Sunday, August 25, 2013 2:20 PM
Subject: [Shop-talk] nylocks
> On the linkage kit for my Weber carbs, there are nylocks that hold the
> bolts that hold the dog bones to the linkage arms. Yesterday I lost one
> of the nylocks and thus the linkage came loose. (A very scary situation
> with an engine with less than 500 miles on it suddenly not running very
> well!!! Thankfully it was easily diagnosed and fixed enough to get
> home!)
>
> Has anyone ever experienced a nylock failing to hold or backing off?
> These were new when they were installed.
>
> Since these connections need to be loose with no binding, should I go
> with a couple jam nuts locked together on each bolt instead of nylocks
> or just stick with nylocks and carry extras?
>
> Thanks
>
> tim
> _______________________________________________
>
> Shop-talk@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/shop-talk/ejrussell@mebtel.net
_______________________________________________
Shop-talk@autox.team.net
Archive: http://www.team.net/archive
|