Hi Bob,
Thank you for your response and suggestions.
Actually I just realized that clamp technologies have moved ahead a great deal
in the last 20 years and the screw-type clamps probably are inferior (e.g.,
tend
to chew into the rubber, do not clamp evenly around the circumference, are
difficult to access in many tight areas in a water-cooled performance
motorcycle, are bulky, look unsightly in exposed areas, etc.).
I was just hoping to reuse the original clamps or something similar. I attached
urls for photos of the clamp in the previous message, but do not know if it is
a
"standard product" or something that only the Italian motorcycle manufactures
are using. :-)
best,
doug
____________________
'72 BSA B50SS
'74 Triumph TR6
'01 HD XHL 883
'03 GMC Cargo Van
'07 Aprilia SXV 550
To: shop talk <shop-talk at autox.team.net>
Sent: Sun, January 30, 2011 5:03:41 PM
Subject: Re: [Shop-talk] best oem hose clamp pliers?
You don't like shiny or you don't like screw clamps? I use Oetiker ear
clamps on my fuel lines. http://www.oetiker.com/content.asp?l=4&idNavig=28
If you don't like worm-drive screw clamps, check out ABA mini clamps. These
were OEM on my old Bimmers.
Bob Kegel
Aberdeen, WA
_______________________________________________
Shop-talk at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/shop-talk/dirtbeard at pacbell.net
|