How about heating up the oversized screwdriver so that it melts the
plastic a bit when it is inserted. That should grab the broken piece
pretty well. Keep in mind that everything is plastic here, so if a
lot of force is required, you're probably going to just snap
something somewhere else.
-Steve Trovato
strovato@optonline.net
At 01:10 PM 9/4/2010, Glenn Owen wrote:
>Same thing happened to me while installing a system a couple of
>weeks ago. I just tapped an oversized flat screwdriver (tapered
>blade) into the broken off piece and unscrewed with no problem.
>If this is an old installation and the sealer has hardened, you
>might have a bigger problem.
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|