Same thing happened to me while installing a system a couple of weeks ago. I
just tapped an oversized flat screwdriver (tapered blade) into the broken
off piece and unscrewed with no problem.
If this is an old installation and the sealer has hardened, you might have a
bigger problem.
> Underground irrigation system has a riser that snapped off. The main
> plumbing in the ground is a 1/2" PVC tee with female threads. A PVC pipe
> with male threads fit in. The riser broke clean at the top of the tee
> fitting. What is the best way to get the riser threads out of the tee?
> Nothing above to grip into. I guess I could drill it out but am afraid of
> hurting the tee threads. Is there some trick I don't know?
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|