On 6/6/2010 8:32 PM, Brian Kemp wrote:
> The only place angle really matters is outside corners. Fit the first
> piece with a 45 deg cut. Have a scrap with 45 deg cuts on both ends
> and test the angle for the other side of the corner. You can then tell
> if the angle is greater or less than 45. Try and come close using the
> paragraph above.
Then glue the joing and tap on the corner to close up any gap.
Peter T.
>
> Brian
>
> John T. Blair wrote:
>> Hey gang, boy do I feel dumb.
>>
>> I purchased a "protractor" or "Inside/Outside Angle Finder"
>>
>>
>http://www.harborfreight.com/web-exclusive-sale/multipurpose-angle-finder-1028.html
>
>>
>>
>> I'm trying to figure out how to read it. The main protractor is in
>> 5deg increments. A couple of months ago I did a google search for how
>> to read
>> something and found a very good description of how to read the
>> vernier on
>> this particular angle finder.
>>
>> Well today I started to put down new base board molding and grabbed the
>> angle finder, and measured the first corner. But for the live of me I
>> can't
>> get an closer to the angle than the 5 degree increments.
>>
>> Anyone have a link to a site that tells you how to read this tool or
>> something
>> similar?
>>
>> TIA
>>
>> John
>>
>>
>>
>> John T. Blair WA4OHZ email: jblair1948@cox.net
>> Va. Beach, Va
>> Phone: (757) 495-8229
>>
>> 48 TR1800 48 #4 Midget 65 Morgan 4/4 Series V (B1106)
>> 75 Bricklin SV1 (#0887) 77 Spitfire 71 Saab Sonett III
>> 65 Rambler Classic
>>
>> Morgan: www.team.net/www/morgan
>> Bricklin: www.bricklin.org
>>
>> If you can read this - Thank a teacher!
>> If you are reading it in English - Thank a Vet!!
>> _______________________________________________
>>
>> Shop-talk@autox.team.net
>> Donate: http://www.team.net/donate.html
>> Suggested annual donation $12.96
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/shop-talk/bk13@earthlink.net
> _______________________________________________
>
> Shop-talk@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/shop-talk/pj_thomas@comcast.net
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|