Not saying this will work but CRC makes "Freeze-Off super penetrant"
with "Freeze Shock Action"
http://www.crcindustries.com/auto/content/literature.aspx
chad
>
>
> At 05:58 PM 11/27/2009, Gerald Brazil wrote:
>> I am trying to remove a dove tail rear iron sight so that I can
>> install a
>> mount for a scope. I have made a block of wood to hold the barrel in
>> my vice
>> and it holds it quite nicely. I have been using a brass punch and a
>> pretty
>> big ball peen hammer to hit the punch. I have tried going both
>> directions
>> with no success. I have no idea if loctite was used when the blade
>> sight was
>> installed. If there was a way to super cool the sight without cooling
>> the
>> barrel it might loosen it up but since the sight is so small if I put
>> dry
>> ice on it the barrel would probably cool down too.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
|