Because you are supposed to replace it every couple/few years, which
most people don't. If brake fluid is replaced
before it absorbs as much water as it can hold, you will have a lot less
components that need to be replaced
because of pitting and rust, at least pitting and rust on the parts of
the component that are in contact with the brake
fluid. It's also pretty cheap.
Peace,
Pat
Thusly spake Doug Braun, On 1/14/2009 8:39 AM:
> If brake fluid is so awful, why do they use it in brakes?
>
> Doug
>
> --- On Tue, 1/13/09, Randall <tr3driver@ca.rr.com> wrote:
> From: Randall <tr3driver@ca.rr.com>
> Subject: Re: [Shop-talk] storing brake components?
> To: shop-talk@autox.team.net
> Date: Tuesday, January 13, 2009, 6:05 PM
>
> You're quite right, conventional brake fluid will destroy the components in
> relatively short order. Somewhere, I've got a pair of brand new rear brake
> cylinders that a previous owner filled with conventional fluid and plugged
> the opening ... they are totally ruined.
>
> But I've had good luck using DOT 5 brake fluid as a long term preservative
> for brake components.
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as pat@hornesystemstx.com
>
> Shop-talk mailing list
>
> http://autox.team.net/mailman/listinfo/shop-talk
>
> http://www.team.net/archive
>
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - http://www.avg.com
> Version: 8.0.176 / Virus Database: 270.10.7/1892 - Release Date: 1/13/2009
>8:04 PM
>
>
--
---
Pat Horne 512.797.7501
Owner, Horne Systems pat@hornesystemstx.com
5026 FM 2001 Lockhart, TX 78644-4443
--We support Habitat for Humanity, a hand UP, not a hand OUT--
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
|