shop-talk
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [Shop-talk] single vs. dual stage compressors

from [Randall] [Permanent Link][Original]
To: <shop-talk@autox.team.net>
Subject: Re: [Shop-talk] single vs. dual stage compressors
From: "Randall" <tr3driver@ca.rr.com>
Date: Thu, 20 Nov 2008 20:43:53 -0800 
> That's not quite right.  The die grinder needs its air supply 
> at 90 PSI, but in a minute it will exhaust 4 CFM of free air, 
> not 4 CFM of 90 PSI air or 28 CFM of free air.

http://www.b2bchinasources.com/showroom.php?c=6707&f=5&p=0000052126

Note where it says "4.5 cfm (32 scfm)".

Randall
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


Shop-talk mailing list

http://autox.team.net/mailman/listinfo/shop-talk

http://www.team.net/archive
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [Shop-talk] single vs. dual stage compressors, Karl Vacek
Next by Date:  Re: [Shop-talk] single vs. dual stage compressors, Randall
Previous by Thread:  Re: [Shop-talk] single vs. dual stage compressors, Karl Vacek
Next by Thread:  Re: [Shop-talk] single vs. dual stage compressors, Randall
Indexes:  [Date] [Thread] [Top] [All Lists]