Howdy,
On Thu, 20 Nov 2008, Randall wrote:
> But there is something to be said for not pumping a big tank up to 175
> psi if you don't need it. I just can't imagine not needing it. Even a
> small die grinder typically needs at least 4 cfm @ 90 psi; which
> translates to some 28 scfm in compressor-speak. And even if I could
> afford a 28 cfm compressor, I don't have enough electrical power to turn
> it!
Wait.
What?
if the die grinder says its needs 4 cfm @ 90 psi and the compressor says
it'll provide 16 cfm @ 90 psi... What's the problem?
Mark
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
|