Just a follow up.
I bought the "Gunk" brand "paint can-o-cleaning for carbs. about 1 hour
in there and the carb runs great! I wish I would have know about this
stuff YEARS ago!
Thanks to all for the suggestions!
Moose
"We all know we're dying, And there's no sign of a parachute."
Tori Amos
"Jack Brooks" <jibjib@att.net>
Sent by: shop-talk-bounces+eric=megageek.com@autox.team.net
05/23/2008 20:40
To
<shop-talk@autox.team.net>
cc
Subject
Re: [Shop-talk] Reviving a carb
Turpentine or other "not so fast" evaporating distillate should be fine,
assuming there were no plastic parts in there.
Jack
-----Original Message-----
From: shop-talk-bounces+jibjib=att.net@autox.team.net
[mailto:shop-talk-bounces+jibjib=att.net@autox.team.net] On Behalf Of
eric@megageek.com
Sent: Friday, May 23, 2008 4:22 AM
To: shop-talk@Autox.Team.Net
Subject: [Shop-talk] Reviving a carb
OK, so I borrowed a rototiller from a friend that hasn't used it in years.
Besides the exhaust valve being stuck (I fixed that,) the carb seems to be
varnished.
I dissembled it and cleaned everything that I could reach. It seems there
isn't much access to the insides of this carb (it's a small B&S motor.)
So, is there a product I can leave the carb soaking in for a while to
break
up the old gas?
I leave for Iraq in a few weeks and I wanted to rototill before I left.
Thanks.
Inch
"We all know we're dying, And there's no sign of a parachute."
Tori Amos
You are subscribed as jibjib@att.net
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
You are subscribed as eric@megageek.com
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
|