At 07:21 AM 5/23/2008 -0400, eric@megageek.com wrote:
>OK, so I borrowed a rototiller from a friend that hasn't used it in years.
>
>Besides the exhaust valve being stuck (I fixed that,) the carb seems to be
>varnished.
>
>I dissembled it and cleaned everything that I could reach. It seems there
>isn't much access to the insides of this carb (it's a small B&S motor.)
>
>So, is there a product I can leave the carb soaking in for a while to
>break up the old gas?
Inch,
You can buy a 1 gal. can of carb cleaner at most auto parts stores.
It comes with a basket to put the parts in. Simply place the parts
in the gal can and let soak for 20 minutes, remove, and dry off,
reassemble.
You can also try squirting in some carb cleaner and letting that sit,
but the spray cleaner evaporates fairly quickly.
John
John T. Blair WA4OHZ email: jblair1948@cox.net
Va. Beach, Va
Phone: (757) 495-8229
48 TR1800 48 #4 Midget 65 Morgan 4/4 Series V (B1106)
75 Bricklin SV1 (#0887) 77 Spitfire 71 Saab Sonett III
65 Rambler Classic
Morgan: www.team.net/www/morgan
Bricklin: www.bricklin.org
If you can read this - Thank a teacher!
If you are reading it in English - Thank a Vet!!
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
|