> The kill switch was taken out of the circuit so there was no ground fault
> in
> the ignition system
Actually, that only means you took the kill switch out of the circuit. A
ground fault may still exist. If the magneto wire is grounded anywhere, it
will not fire. Many an owner has killed the ignition by installing the
shrouds and pinching the wire for example. So check that wire all the way
back, and make sure no where is it able to make ground.
Those magnetron units are not impervious to simply failing. Yours may have.
Just make darn sure that there isn't a grounding problem causing the
ignition to not fire before buying a new magneto.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
|