Instead of wacking on the chuck key another thing you can do is
to tightly chuck up a large allen wrench and wack on the end of
that.
Drew
Randall wrote:
>> I have a Dewalt DW100 drill. I would like to replace the
>> chuck but can't figure out how to remove it. Can anyone offer
>> any help?
>
> I don't know anything about that model in particular; but generally you have
> to open the chuck jaws all the way, then remove the left-hand screw that is
> inside. Most likely Allen head, but might be slotted/Philips. Then put the
> chuck key in, and smack it with a hammer to break the chuck loose on it's
> right-hand threads.
>
> Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
|