I purchased a similar motor off of my local craigslist, but I had to
wait a long time for one to appear and I have not seen one since. We
are using a 1/2 Hp Harbor Freight motor running a small reciprocating
airbrush type compressor for 1 year of 10 hour days, 7 days a week
operation without any problems.
Brian
-----Original Message-----
From: shop-talk-bounces+bwarrick=conveyorengineering.com@autox.team.net
[mailto:shop-talk-bounces+bwarrick=conveyorengineering.com@autox.team.ne
t] On Behalf Of Bill Gilroy
Sent: Thursday, January 24, 2008 1:57 PM
To: Frank Vantacich
Cc: Shop Talk
Subject: Re: [Shop-talk] lathe motor
Try http://www.craigslist.org, they seem to pop up there all the time in
the
seattle area. I have heard of people using the cheap 5hp compressor
motor
from Harbor Freight to make a rotary phase convertor; maybe that will
work
on the lathe.
-g
On Jan 24, 2008 9:00 AM, Frank Vantacich <rustymetal@sbcglobal.net>
wrote:
> I am in need of a 5hp 1725rpm electric motor for a metal lathe. Does
any
> one know of a good source for something like this, it doesn't have to
be
> new. So far I've seen prices ranging from 375.00 to 475.00 and may be
> this is what I will end up spending.
>
> Thanks for the help.
>
>
> Frank V.
> rustymetal@sbcglobal.net
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as wmgilroy@gmail.com
>
> Shop-talk mailing list
>
> http://autox.team.net/mailman/listinfo/shop-talk
>
> http://www.team.net/archive
You are subscribed as bwarrick@conveyorengineering.com
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
|