Re: [Shop-talk] head bolt socket recommendations

shop-talk

Re: [Shop-talk] head bolt socket recommendations

To:	"'Gerald Brazil'" <gerrybraz@cablespeed.com>, "'Skip Albright'"
Subject:	Re: [Shop-talk] head bolt socket recommendations
From:	"Paul Mele" <paul.mele@usermail.com>
Date:	Wed, 21 Nov 2007 22:59:21 -0500

<<Lacking a lathe you could probably do a satisfactory job by chucking it in
a
drill press, spinning it and then use a grinder to trim it down.>>

I did this successfully for the Torx socket to fit the S52 BMW head...
_______________________________________________

Shop-talk mailing list

http://autox.team.net/mailman/listinfo/shop-talk

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[Shop-talk] head bolt socket recommendations, Skip Albright Re: [Shop-talk] head bolt socket recommendations, David Scheidt Re: [Shop-talk] head bolt socket recommendations, Gerald Brazil Re: [Shop-talk] head bolt socket recommendations, Bob Kegel Re: [Shop-talk] head bolt socket recommendations, scott.hall Re: [Shop-talk] head bolt socket recommendations, Steven Trovato Re: [Shop-talk] head bolt socket recommendations, Randall Re: [Shop-talk] head bolt socket recommendations, Mark Andy Re: [Shop-talk] head bolt socket recommendations, Randall Re: [Shop-talk] head bolt socket recommendations, Paul Mele <=

Previous by Date:	Re: [Shop-talk] Rebuilding the automatic, Bob Kegel
Next by Date:	Re: [Shop-talk] Rebuilding the automatic, Pat Horne
Previous by Thread:	Re: [Shop-talk] head bolt socket recommendations, Randall
Next by Thread:	[Shop-talk] Fluorescent ballasts in the cold, Karl Vacek
Indexes:	[Date] [Thread] [Top] [All Lists]