shop-talk
[Top] [All Lists]

Re: Water pump and furnace emergency electrical connections

To: <roadsters@hornesystemstx.com>
Subject: Re: Water pump and furnace emergency electrical connections
From: "Karl Vacek" <kvacek@ameritech.net>
Date: Fri, 29 Dec 2006 16:58:30 -0600
You're right.  I need to get back to finishing my last few 2006 jobs and not 
half-reading e-mails.  I suggested that he do just what he was going to do 
in the first place.

Senior moment -- SORRY to all !!

Happy New Year
Karl


> Hmm, I read it as the pigtail would be the wire that had been cut loose 
> from the breaker, that was to be plugged into the socket not attached to 
> the breaker, or into the extension cord connected to the generator.
>
> "I propose cutting each circuit between the breaker and switch, and 
> installing a suitably rated three prong female plug on the breaker side of 
> the cut and a three prong male plug on the switch side of the cut.  This 
> would give me the ability, during power outages, to kill the breaker, 
> unplug the device, and then plug it into a 12/3 extension cord running 
> from my generator."




<Prev in Thread] Current Thread [Next in Thread>