I have a 1960's IR Type 30 which came into my possession a few years
ago. The compressor had been out of service for some time and I wanted
to either test or replace the tank prior to putting it back into
service. I weighed the time involved in doing it myself and the cost of
paying a company to test it against the relatively low cost of a new
tank and decided that the quickest and easiest solution was to simply
purchase a new tank.
Paying someone else to test the existing tank looked like it would be
equal to or greater than the cost of a new tank - if I could even find
someone to do it. Testing it myself would have made a (small) mess and
eaten up half a day when all was said and done.
My new tank cost ~ $400 if I recall correctly. If you keep your eyes
out, you can probably find a tank from a burned up oil-less compressor
for free. I've given away two of those myself in the past year (my
friend's dead things seem often to make their way into my shop whereupon
I quickly call the scrap man when their backs are turned).
McMaster has a variety of replacement compressed air tanks. The only
real hassle is that some re-plumbing will probably be required. I
believe Grainger also sells compressed air tanks.
That's my 2 cents. Pressure vessel failure is a bad situation.
-Vin
>
> You might try checking with a friendly dive shop. There are rules that's
> require visual testing fairly often (yearly?) and hydro testing every xx
> years (10?). Probably don't want to test at full scuba tank pressures
> though. I know my compressor tank won't handle 3000 PSI.
--
T.E. Motorworks, Inc.
Post Industrial Laboratory
215.426.1447
|