shop-talk
[Top] [All Lists]

Re: fiber-cement siding?

To: "Shop Talk" <shop-talk@autox.team.net>
Subject: Re: fiber-cement siding?
From: "Steve Hammatt" <GSteve@hammatt.com>
Date: Thu, 3 Jul 2003 20:30:25 -0700
Keith
Tell me more about your stone materials
and their use with Rastra (www.rastra.com)
Thanks.
Steve

----- Original Message ----- 
From: "Keith Turk" <kturk@ala.net>
To: "Steve Hammatt" <GSteve@Hammatt.com>; "Shop Talk"
<shop-talk@autox.team.net>
Cc: <pethier@isd.net>
Sent: Thursday, July 03, 2003 8:21 PM
Subject: Re: fiber-cement siding?


> again.... I'm in the siding business.... I manufacture a Concrete Stone
> Veneer product..... it's Very frequently used with Hardi Plank.... and
like
> you I'm in love with it.... great idea that should last a life time....
> especially if you use Stone with it.... Hey Come on a plug here or
there....
>
> Keith ( it's way to expensive to ship it but if your in Southern Alabama
> anyway drop on by it's only 900 lbs a square )
> ----- Original Message -----
> From: Steve Hammatt <GSteve@Hammatt.com>
> To: Shop Talk <shop-talk@autox.team.net>
> Cc: <pethier@isd.net>
> Sent: Thursday, July 03, 2003 9:50 PM
> Subject: Re: fiber-cement siding?
>
>
> >
> > Phil
> > I'm no expert, but have used Hardi siding and am in love with it!
> > I'd suggest the traditional clapboards.  It looks just like a regular
> > clapboard siding without a lot of the long-term headaches.
> >
> > Cut it with a carbide tipped Skil saw, You'll need to sharpen the
> > blades a little more often than if cutting wood.  My carpenters
> > simply nailed it with galvanized nails, if my memory is correct.
> > I don't recall any reason for stainless steel fasteners.  Check with
> > the manufacturer, I'm sure it will be mentioned in their literature.
> > We simple used latex paint, nothing special.  It covers beautifully!
> > I'd say it is more durable than cedar.  We've even used it to replace
> > some damaged areas on our kennel building where the dogs had
> > 'worn-away' some of the reachable areas of the cedar.
> >
> > I don't see how it can rot your sheathing, especially if you're using
> > the clapboards.  The clapboards, by their very definition and design,
> > allow for breathing.  Of course, you'll want to use building wrap for
> > best protection.
> >
> > Asking about other material for me is an interesting question.  For
> > any remodel or new construction of this type, I'd go with Hardiboard.
> > However, we're getting ready to build a new house and we're going
> > with a unique form of ICF (Insulated Concrete Form) material called
> > Rastra (www.rastra.com).  Check it out for new construction, it's not
> > designed for remodeling or recovering existing materials.
> >
> > Good luck
> > Steve Hammatt
> > Mount Vernon WA USA
> >
> >
> > ----- Original Message -----
> > From: "Phil Ethier" <pethier@isd.net>
> > To: <shop-talk@autox.team.net>
> > Cc: <pethier@isd.net>
> > Sent: Thursday, July 03, 2003 7:09 PM
> > Subject: fiber-cement siding?
> >
> >
> > >
> > > OK, I am focusing my question about the siding for my shop and for my
> > house.
> > >
> > > I have a mix of vinyl (only 4 years old, yet broken here and there on
> the
> > > neighbor's side) and ancient hardboard on the shop/garage.  I have
pink
> > (may
> > > be original?) aluminum on the 1950-vintage house.  This stuff is a
mess.
> > > The individual corner pieces are askew.  There are holes drilled in it
> > here
> > > and there for now-unknown reasons.
> > >
> > > I was just down at Menards looking at a fiber-cement product.  Has a
> > 50-year
> > > warranty.

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/shop-talk


<Prev in Thread] Current Thread [Next in Thread>