Quoting Mike Rambour <mikey@b2systems.com>:
>
> > > Did you build the blast cabinet from the tptools.com plans?
>
> Don,
>
> Yes, I did. Exactly the size I wanted/needed and it works far better
> than I expected. I was a little concerned about it holding up to fairly
> regular use but its doing very well. Big advantage of building it
> yourself is making it the size you need and putting doors on both ends :)
>
> Mike
FWIW, I installed a sheet of 'resist' material across the back wall when I
built blast cabinets from plywood. This is a rubbery material about 1/8" thick
used to make stencils when blasting designs onto glass. IIRC, TPtools sells
this item also. Helps to protect the back wall of the cabinet from stray blasts.
Eric
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/shop-talk
|