Hi All,
I just finished one which I built after some plans I found on the net. I
could forward the .pdf file to anyone who wants it. It is a syphon version
and I used the various bits and pieces from TIP tools - the whole thing
works well - for the most part. I am using a shop vac I scrounged which
runs the cabinet at a negative pressure. Some thoughts:
* Get the biggest compressor you can afford
* Make sure you deal with moisture in the compressed line - I have 25+
feet of pipe set up as a cooling stage on one of my walls to help collect
moisture.
* Lots of good media choices out there - I just did some rims with
glass bead worked well (lesson learned: clean off brake dust after a day at
the track :-)
* This stuff is dangerous if you breath it - lots of warnings in the
literature - make sure stuff is well sealed...
Ray Bahr
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/shop-talk
|