Blake,
Good point. I would only add that there are probably no unrepairable Twin
Cam Wheels.
Al
----- Original Message -----
From: "Bullwinkle" <yd3@nvc.net>
To: "'Shop-Talk'" <shop-talk@autox.team.net>
Sent: Saturday, February 02, 2002 10:04 AM
Subject: Re: Inflatable Spare:
>
> Larry:
>
> <<<snip>>>
> I did all this to gain some trunk space.
> <<<snip>>>
> That's what I want to do.
>
> <<<snip>>>
> I had them weld a spline drive hub to a center, which they welded to a
> space saver rim; I also had them change the offset.
> <<<snip>>>
> A good idea, but twin cams don't use spline drive hubs. They use a peg
> drive hub along with the knock off. So now the problem is locating a
> unrepairable twin cam wheel that has a good center section.
>
> Blake
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/shop-talk
|