I had not thought of using plywood for a skid surface. Biggest concern with
dragging it is that the 4x4s don't look like they'd take much abuse,
particularly across their direction of travel.
I had also looked into renting a 4wd forklift. The problem was the forks
are too short to reach past the center 4x4. If I could find some long
forks.....
Rex Burkheimer
> I would start by thinking about using a relatively small tracked
> vehicle or a couple of BobCats as motive force and a small stack of
> shop quality or worse plywood as skid surface, or a couple of steel
> plates with rings for pulling set under your building and tow them
> with the D4 or BobCats.
>
> Interesting problem.
>
> -Roland
///
/// shop-talk@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe shop-talk
///
///
|