shop-talk
[Top] [All Lists]

Re: Setting up air lines in the shop

To: "Stephen" <slb1@humboldt1.com>, "Pauley, Ken" <Ken.Pauley@Allin.com>,
Subject: Re: Setting up air lines in the shop
From: Mike Rambour <mikey@b2systems.com>
Date: Tue, 04 Jan 2000 19:58:52 -0800

>I set my compressor plumbing the way TIP Tools suggests.  I used 3/4"
>galvanized pipe with risers and drains as they describe.  I have attached a
>link to their web page that describes the plumbing set up through a link
>about half way down the page at number 5.  The link was not working when I
>tried so you may want to give it a try yourself.

   The reason the link on item 5 is not working is because its missing the 
"www" in the address.  I went to the following link as suggested
http://www.tiptools.com/tech_line/compressors/air_consumption.html
and on item 5 there is a link which SHOULD look like this to work
http://www.tiptools.com/compressors/piping_diagram.pdf
but in the document its missing the "www""

         mike

~~~~~ I'd rather be sailing ~~~~~~~and \/    \/  ~~~~~~~~~~~~~~
Mike Rambour                              .oooO  Oooo.
Bug Writer er...Programmer            (   )   (   )
                                                       \  (    )  /
                                                        \_)  (_/
              webmaster@b2systems.com
***********************************************************************
If you want to learn more about the ULTIMATE BRITISH sports car, then
take a look at   http://www.singercars.com/
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

<Prev in Thread] Current Thread [Next in Thread>