If you do apply force, I'd recommend twisting (put the adhesive in shear)
over peeling. Peeling's a lot more likely to break the glass. I once had
pieces of metal bonded to some sensitive pieces of enamel, and my
orthodontist clipped a little tool onto each one and twisted quickly. It
took each brace right off with no damage to the tooth. I've never actually
had to remove something stuck onto a car window, I'm just assuming the same
thing would work.
Solvents are unlikely to be much help since there's probably a lot of
bonding area in the middle that the solvent won't reach.
www.keithka.com
-----Original Message-----
From: John Miller [mailto:johnm@ims.com]
of this is a small metal block (approx. 1 1/2" square by 1/4" thick)
bonded to the rear hatch glass.
My question is: Does anyone have any suggestions for removing this
without destroying the glass?
|