On aircooled VW engine tin (pretty thin stuff), butt welding and
repairing breaks and tears, I use a jeweler's torch and about 2psi. I
can do the job with a MIG but the result is messier and needs grinding
to finish.
-Roland
On Thu, 06 Aug 1998 16:59:02 -0400, you wrote:
:
:George Zhookoff wrote:
:> Also I have been investigating a gas torch called the Henrob welding
:> torch. Have you heard of it? It is supposed to weld but only needing
:> 4 psi of gas and oxygen, so with minimal distortion and less gas use.
and Trevor asked:
: What psi do you use with your normal torches?
:
: I use about that PSI with my oxy-acet rig. However, I only
:do enough welding with it to remind myself that I should
:be using the MIG instead.
|