George, if you are considering a torch you might want to just get
a MAPP gas torch. You can braze or use it to heat metal parts cherry red
for easy removal. The next step up would be the oxygen and propane or Mapp
gas that you can cut metal with. Both are under $50 dollars at Home Depot
or other stores.
...Art
On Wed, 5 Aug 1998, George Zhookoff wrote:
>
> Here is a question regarding a welding torch. Is there anyone on the
> list that could give any information? BTW the web sites Hamish lists
> are very interesting to say the least!
>
> Also I have been investigating a gas torch called the Henrob welding
> torch. Have you heard of it? It is supposed to weld but only needing
> 4
> psi of gas and oxygen, so with minimal distortion and less gas use.
> I'm
> thinking of getting one as it would allow me to patch panels that I
> would otherwise have to replace entirely.
>
> Cheers,
> Hamish
>
> --
> Mini Cooper Web: http://www.mini.org/minirestoration/CooperWeb.html
> Mini FAQ: http://www.mini.org/minirestoration/Technical/TechFAQ.html
>
>
|