Richard,
Burlen fuel systems do a rebushing kit for SU's. You need a 5/16"
reamer and be sure to have the spindle vertical. A simple way is to fit the
spindle in the carb and in turn in the drill chuck (obviously a pedestal
drill), make sure it is true and then tighten the machine vice.
Blessings be upon you, JH
----------
> From: Richard MacCormac <r.m.j.m@btinternet.com>
> To: shop-talk@Autox.Team.Net
> Subject: Throttle spindle bushings
> Date: 15 February 1998 12:35
>
> I need to replace some worn throttle spindle bushings on the carbs from
> my MG (SU HS4s). Out of intrigue, or possibly madness, I am considering
> doing the job myself.
> Has anyone on the list done something like this? How do I go about it? I
> want to know whether it is possible for me to get a reasonable result
> using a bench press and a hand reamer, or whether I should just give up
> now and send things off to a professional machine shop.
> Tips on pressing/drilling/reaming the original bushings out would also
> be appreciated. Thanks, Richard
|