I run my 54 with 55fst series rear end with -2 Degs When you stand on it
will come up some but with what you have you may need to play with it
some but I would start with -2 degs where are you located I am in Fort
Worth TX.
Robert
james hays wrote:
> Oletruckers: Have 55-1st pu with IFS & stock ( new less 2 leafs ) rear
> springs. I have two opposite opinions on pinion angle.
>
> Printed info says match the trarns angle with same in opp. direction - trans
> down 4 d - pinion down 4 d. with centerlines crossing for pro-touring cars.
>
> Same printed data shows centerlines parallel on the same angle - not crossing
> for production passenger cars.
>
> Don't plan on using the truck for much of a truck - could smoke a tire or two
> with fuel injected LT1 - if that makes any difference.
>
> Penny ( dollars ) for your thoughts,
>
> Jim
>
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> http://www.team.net/archive
>
> Oletrucks@autox.team.net
>
> http://autox.team.net/mailman/listinfo/oletrucks
>
> You are subscribed as bairdr54@sbcglobal.net
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
Oletrucks@autox.team.net
http://autox.team.net/mailman/listinfo/oletrucks
|