easy/best way.
front brakcet has 3-9/16 head bolts. just take out the whole hanger
bracket.
take off the shocks
rear-pull the bolt out of the hanger-hammer the shackles off-roll rear
out.
THEN TACKLE THE FRONT
front;
get front sheetmetal out of the way
then there should only be 2 bolts and a ground strap on each leg of the
sub.
put jackstand under subframe to hold it to the car-take bolts out, jack
car up-roll out subframe.
done
SECOND OPTION if you dont ever want anything else off car(strip it all
first)
unbolt everything-leave car on trailer, chain sub and axle to
trailer-lossen car body-take to scrap yard and have them fork off the
body.
goto dollar-store on your way home, get a few cans of oven cleaner and
then proceed to your local open-air DIY car pressure-wash center...
spend 5-10$ in quarters.. wash it, go home and spray some primer on teh
bare metal....
nor-cal---------------------------http://customclassics.org
Tired of spam? Yahoo! Mail has the best spam protection around
|