Steve, back-up switch....how about a brake switch like on firewall of most
AD trucks? lever hits it and pushes it to go on. On 3spd, would be easy with
linkage, even up on firewall. Not sure if you can get enuf movement for only
Reverse on lever. Never mind, no room under floor there, and look stupid on
top of floor, kinda dumb after all. Could have a push on only, that you have
to hold and mount it on shifter like a 2spd switch is. OR, a 2spd switch
itself on lever. Seems like you would remember easier, be one hand/finger
operation, and right handy. Wouldn't even need to look to use it. I like
that idea. Truck places should have a switch like that!
G. L. Grumpy's
Old Iron Ranch
Huntington, IN 46750
AD trucks and MM tractors
----- Original Message -----
From: "Steve Hanberg" <steve@OldSub.com>
To: "Alan Horvath" <alan@alanhorvath.com>
Cc: <oletrucks@autox.team.net>
Sent: Saturday, November 22, 2003 5:48 PM
Subject: Re: [oletrucks] Backup Lights
> Naturally, though since these are original parking lights, they each have
> one single filament bulb currently. I'm still debating what I'm going to
> put in it, and thought I'd check the halogen bulb options before deciding.
>
> I also need to decide how to control them. These isn't any kind of switch
> on my sm420 and I don't want to go looking for one of the later ones that
> has the switch. I'm thinking relay control with a reed switch positioned
so
> a magnet on the shift lever triggers it only when in reverse.
>
> There may be a better answer, but that's where I'm at today. The easiest
> is a toggle that I have to remember to turn off, and that's risky...
>
> Thanks!
>
> ----- Original Message -----
> From: "Alan Horvath" <alan@alanhorvath.com>
> To: "Steve Hanberg" <steve@OldSub.com>
> Cc: <oletrucks@autox.team.net>
> Sent: Saturday, November 22, 2003 1:45 PM
> Subject: Re: [oletrucks] Door Strikers and Latches
>
>
> Hey, Steve
>
> I'm glad my site helped you out.
> :o)
> They work great, too - when I turn 'em on, they light everything up
> nice and bright! Naturally, you'll want to hook up BOTH wires to the
> hot lead to get the full brightest of a backup light.
>
> Alan
> http://AlanHorvath.com/54chevy/
>
> Steve Hanberg wrote:
>
> > Hey Alan I don't have any information about latches and strikers, but
> > I thought I should thank you for the backup light idea.
> >
> > I was looking for a backup light solution for my '55 1st Suburban and
> > your idea using the parking lights from a '47-'53 seems perfect,
> > especially because I'm parting out a '47.
> >
> > This morning my son removed the lights from the '47 and as I was
> > holding things up against the Suburban I wondered how you'd dealt with
> > some of the issues. It was nice to be able to check your photos and
> > write-up on your web site to get answers to just the questions I was
> > asking.
> >
> > Great Job and Thanks!
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|