There are also some clutch head bits in a bit set from Sears. Seems
like it was about $20 for the screw driver and the bits, but there were
all sorts of other bits that came with it.
Pat S.
Saginaw, MI
54 3600
-----Original Message-----
From: owner-oletrucks@autox.team.net
[mailto:owner-oletrucks@autox.team.net] On Behalf Of McGillis@aol.com
Sent: Saturday, November 22, 2003 1:42 PM
To: oletrucks@autox.team.net
Subject: [oletrucks] Clutch Head Drivers
Clutch Head screws are used all over old Chevy trucks. Many of us have
drivers like a screw driver but would like a set to use with a 1/4 or
3/8 socket
set.
Brad Kyle has a set from Snap-on. They are insert bits with part
numbers:
SDM242G, SDM243G, SDM244G, SDM245G, & SDM246G, he bought all five about
2 years
ago off of the truck and thinks the set ran about $16.
Today I can find only three sizes at snapon.com 3/16 (TM27), 1/4 (TM30)
and
5/32 (TM31), all are $11.55/each. My son's neighbor has a Snap-on truck
and I
have asked him to check on the availability of the set like Brad has.
I'll
report the result!
Dennis McGillis
1955 Cameo (V8 CAMEO)
Vintage Chevrolet Club of America
Orange County (CA) Region
949-551-4821 phone
949-551-1162 fax
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|