Good Dennis I'm interested too as I haven't been able to the larger size
sockets, maybe just the bits are still available as Brad mentioned.
Lee
----- Original Message -----
From: <McGillis@aol.com>
To: <oletrucks@autox.team.net>
Sent: Saturday, November 22, 2003 10:42 AM
Subject: [oletrucks] Clutch Head Drivers
> Clutch Head screws are used all over old Chevy trucks. Many of us have
> drivers like a screw driver but would like a set to use with a 1/4 or 3/8
socket
> set.
>
> Brad Kyle has a set from Snap-on. They are insert bits with part numbers:
> SDM242G, SDM243G, SDM244G, SDM245G, & SDM246G, he bought all five about 2
years
> ago off of the truck and thinks the set ran about $16.
>
> Today I can find only three sizes at snapon.com 3/16 (TM27), 1/4 (TM30)
and
> 5/32 (TM31), all are $11.55/each. My son's neighbor has a Snap-on truck
and I
> have asked him to check on the availability of the set like Brad has.
I'll
> report the result!
>
> Dennis McGillis
> 1955 Cameo (V8 CAMEO)
> Vintage Chevrolet Club of America
> Orange County (CA) Region
> 949-551-4821 phone
> 949-551-1162 fax
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|