Wayne can you tell if it hanging up on the brake shoes or axle?
If it the brake shoes you might have to grind the pins off and take them off
in one piece, if it's the axle get a puller put pressure on the drum, put
some penetrating oil around the axle,and persuaded it with a dead blow
hammer.
Good Luck
Hoot58
----- Original Message -----
From: "wayne osborne" <wayne@chevytrucks.org>
To: <oletrucks@autox.team.net>
Sent: Monday, July 21, 2003 5:41 AM
Subject: [oletrucks] brakes
> Trying to figure out something to help this guy--- any ideas....
> He's got a rear brake drum that will not come off, the adjustment knob
> notches are virtually non existent so no chance of backing the adjustment
off.
> The wheel is seized up and will not turn, any ideas on how to get the drum
off.
> --wayne
>
>
>
> Wayne Osborne
> http://www.chevytrucks.org
> http://www.chevytrucks.org/wayne
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|