<snip>
Amps is Amps, Volts are Volts. Cant read both off same gauge.
<snip>
Yes you can, I used to do it all the time with old power supplies. You make
a switch arrangement that switches from a shunt resistor (which is built
into the TF ammeter) to a multiplier resistor for a voltmeter.
I suspect the real problem with making a TF ammeter getting rid of the shunt
inside the meter and then determining the internal impedance of the meter so
you could figure an multiplier resistor for it. I've never looked into it
but electrically it can be done...
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|