Sounds good !
Joe
----- Original Message -----
From: "Jim Taylor" <lj.taylor@sympatico.ca>
To: "57chevy" <oletrucks@autox.team.net>
Sent: Tuesday, March 11, 2003 4:15 AM
Subject: [oletrucks] more info on front clip
> Hello once again,
>
> before i go into major detail i justed wanted to thank all of you for your
> help and info.
>
> o.k,
>
> The frame is stock not modified.
> the doors are southern not rusted along with the cab, doors etc.
> i installed front and rear axles from a 79 4x4 blazer on original frame
and
> suspention nothing should have changed the dimensions of the mounts.
>
> i did notice that the front radiator rubbers are about 1/4" but i dont
think
> thats the problem because if i reduce that the bottom of the grill support
> will be sitting on the frame rails.
>
> with some of the info i got from all of you i think i will try loosening
> everything off jack the cab slightly fitt the doors, hang the fenders and
the
> front clip and then shim as required.
>
> does this seem like the thing to do!
>
> thanks guys.
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|