Use a SS welding rod. will work every time on SS to reg steel only problem
is removing the weld, you will have to grind it out if you ever need to
remove it.
Pat 67 Nova SS
41 Art Deco chevy truck
----- Original Message -----
From: "haist" <haist2@attbi.com>
To: "Pat Cossey" <ccossey@seark.net>; "Mark Self" <mark.self@verizon.net>;
"Oletrucks Mailing List" <oletrucks@autox.team.net>
Sent: Monday, January 20, 2003 9:54 PM
Subject: RE: [oletrucks] AD bed angle strips
> How would you weld ferrous to non-ferrous?
>
> Art Deco Whitney
>
> -----Original Message-----
> From: owner-oletrucks@autox.team.net
> [mailto:owner-oletrucks@autox.team.net]On Behalf Of Pat Cossey
> Sent: Monday, January 20, 2003 7:32 PM
> To: Mark Self; Oletrucks Mailing List
> Subject: Re: [oletrucks] AD bed angle strips
>
>
> Mark I`m talking off the cuff here having never done this my self BUT I
have
> seen this done two ways.
> #1 drill and bolt with SS bolts thru the bed .
> # 2 drill small holes in line with the strip thru the bed and weld from
the
> back side( strip can be polished back out) holes after welding can be
> ground down and re painted.
>
> Pat 67 Nova SS
> 41 Art Deco chevy truck
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|