My usual search for 47-55 stuff on eBay turned this up just now:
KENT-MOORE J-5819 CLUTCH GAUGE 47-55 PONT
I don't know if PONT means Pontiac, but perhaps someone here would be
interested.
----- Original Message -----
From: "Hanlon, Bill" <Bill.Hanlon@hp.com>
To: "Wayne Osborne" <wayne@chevytrucks.org>; <oletrucks@autox.team.net>
Sent: Wednesday, June 19, 2002 6:02 AM
Subject: RE: [oletrucks] transmission tools
> If anyone needs Hydra-Matic info for some specific purpose, I've managed
to accumulate a fair collection.
>
> Maintenance Manual GMC Truck Hydra-Matic Transmission Operation and
Maintenance x-5706. Specific to GMC truck Hydra-Matics. 139 pages. This
has all the adjustments using special tools.
>
> GM Hydra-Matic Transmission Parts Catalog Bulletin 37A-100. Complete
parts listings and drawings for ALL Hydra-Matics from 1940 to 1957. 27
pages of Chevy Truck, 48 pages of GMC Truck.
>
> Hydra-Matic Overhaul Practices for GMC Trucks X-5844. 38 pages plus 35
pages of The Shop Requisition for GMC Hydra-Matic Parts.
>
> Hydra-Matic Drive Principles of Operation - Detroit Transmission
Division 63 pages
>
> Hydra-Matic Transmission Service Manual, A Paul Marsh Publication 1956.
262 pages of theory, on-vehicle adjustments and overhaul instructions.
Shows how to make many adjustments without the special tools.
>
> United Delco Transmission Parts Application Catalog - 1968. Covers most
GM automatic transmissions from 1946-1964 including 30 pages on Dual Range
Hydra-Matic as used in GMC and Chevy trucks.
>
> Plus there are 17 pages on Hydra-Matic linkage adjustments in the
Maintenance Manual GMC Trucks Models 100 thru 500 X-5703. This is the
reprint maintenance manual that is currently available through most of the
OleTruck parts vendors.
>
> Also see http://members.aol.com/autotran3/HMBAdj1.html for how to do band
adjustments without Kent-Moore tools.
>
>
> -----Original Message-----
> From: Wayne Osborne [mailto:wayne@chevytrucks.org]
> Sent: Tuesday, June 18, 2002 8:43 AM
> To: oletrucks@autox.team.net
> Subject: [oletrucks] transmission tools
>
>
> received the below the other day--anyone know is any of these tools are
> available and is so--who sells 'em.. --wayne
>
> I HAVE A 1956 CHEVY TRUCK ALSO AND I WANT TO RESTORE IT. MINE HAS A
> HYDRO/MATIC TRANSMISSION AND I NEED THE ADJUSTING TOOLS THAT PUT THE
PROPER
> TORQUE ON THE FRONT AND REAR BANDS. THE TOOLS I NEED ARE #1 FRONT SERVO
> GAUGE #J1693-A #2 SERVO BAND ADJUSTER #J2681-A AND #3 REAR SERVO GAUGE
> #J5071 I KNOW THAT THESE ITEMS ARE NOT MANUFACTURED ANY MORE BUT I HOPE
> THAT YOU WILL KNOW WHERE I CAN PURCHASE THESE ITEMS. I HAVE BEEN ALL OVER
> THE WEB LOOKING FOR SOMEONE WHO HAS THESE ITEMS AND WILL SELL THEM. THANK
> YOU FOR YOUR TIME AND HELP IF I AM IN THE WRONG AREA PLEASE POINT ME IN
THE
> RIGHT DIRECTION SO THAT I CAN GET MY CHEVY TRUCK UP AND RUNNING. AGAIN
YOUR
> TRUCK IS WONDERFUL THANKS DEAN CARMICHAEL
>
>
>
>
>
> Wayne Osborne
> 1956 Chevy Pickup
> LaGrange Ga.
> http://www.chevytrucks.org
> http://www.chevytrucks.org/wayne
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|