To the group.
I've got a Fulton sunvisor for my '53 Chevy 1/2 ton pu that I am restoring.
Prior to finish painting, I've mounted this visor on the cab using directions
that were posted via this listing. Overall, the directions are very good. The
directions do not give guidelines regarding the position of the visor over the
cab roof. Mine may be too high. It seems to me that there may be too much
space between the cab roof and the trailing edge of the visor. The way it sits
now, it is about 2" above the cab roof at the center of the visor (tapering
down to less than an inch at the outer edges). Does anyone know what the
correct spacing is for the trailing edge of the visor and the roof of the cab?
It seems to me that the visor will need enough clearance so that it does not
trap air flow and begin acting as a 'spoiler', but too much clearance won't
look correct. Any ideas?
Thanks in advance.
***********************************************************************
Jim Wilkerson
***********************************************************************
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|