There is supposed to be a wire from the brake light switch to the turn
signal switch, which automatically takes care of the problem.
-Josiah Bartlett
> -----Original Message-----
> From: S Culver [mailto:sculver@mcleodusa.net]
> Sent: Friday, March 08, 2002 2:03 PM
> To: oletrucks list
> Subject: [oletrucks] Tail lights
>
>
> I can't believe I'm having to ask this, but I'm stumped. The
> brake lights on
> the '58 quit working, so I decided to re-wire everything back
> to the tail
> lights. Now I have tail lights and turn signals, but when I
> wire in the brake
> lights, it closes the circuit between the two sides, and both
> sides blink.
>
> I have 3 wires going to the tail lights. One wire splits and
> goes to both
> tail lights on the dim side of the bulb. I have one wire to
> the bright side
> on the left for the left blinker, and one wire to the bright
> side on the right
> for the right blinker. How do I go from the brake light
> switch to the bright
> side of both tail lights now without interfering with the blinkers?
>
> Thanks in advance-
>
> Smokey Culver
> League City, TX
> oletrucks is devoted to Chevy and GM trucks built between
> 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|