Sorry about the confusion Jim I had my years mixed up. Yeah you can just
run an inline fuse to protect the circuit.
Your signals should have there own inline fuse going into the signal switch.
Are your signals a 7 wire or 4 wire circuit?
-----Original Message-----
From: Jim House <jhouse@ccsolution.com>
To: 'joe' <chevy1@jps.net>; 'Hanlon, Bill' <Bill.Hanlon@COMPAQ.com>;
Tom3600@webtv.net <Tom3600@webtv.net>; oletrucks@autox.team.net
<oletrucks@autox.team.net>
Date: Monday, May 07, 2001 1:07 PM
Subject: RE: [oletrucks] Brake light switch
>I have a 46 and the only fuse in the truck I can find is installed on the
>back of the headlight switch. This seem to work for ALL lights connected
to
>this switch (headlight/taillight/parking and the brake light.
>
>NHJim
>
>-----Original Message-----
>From: owner-oletrucks@autox.team.net
>[mailto:owner-oletrucks@autox.team.net]On Behalf Of joe
>Sent: Monday, May 07, 2001 3:19 PM
>To: Hanlon, Bill; Tom3600@webtv.net; oletrucks@autox.team.net
>Subject: Re: [oletrucks] Brake light switch
>
>
>Hi Bill,
>
>Wasn't the two circuit fuse block on the drivers side firewall for parking
>and stop lights?
>
>Joe
>-----Original Message-----
>From: Hanlon, Bill <Bill.Hanlon@COMPAQ.com>
>To: 'Tom3600@webtv.net' <Tom3600@webtv.net>; oletrucks@autox.team.net
><oletrucks@autox.team.net>
>Date: Monday, May 07, 2001 11:05 AM
>Subject: RE: [oletrucks] Brake light switch
>
>
>>Assuming no turn signals, that is all that is involved.
>>Even though there wasn't a fuse in the circuit originally,
>>if it were me I'd protect the circuit with a fuse between
>>the switch and where ever you are getting the "hot" from.
>>
>>-----Original Message-----
>>From: Tom3600@webtv.net [mailto:Tom3600@webtv.net]
>>Sent: Sunday, May 06, 2001 7:48 PM
>>To: oletrucks@autox.team.net
>>Subject: [oletrucks] Brake light switch
>>
>>
>>I need some help. I am rewiring my stock '49 Chevy brake light switch.
>>Do I just put a hot wire to one brake light switch post connector and a
>>wire to the brake lights from the other post on the switch or is it more
>>complicated??
>>
>>Thanks,
>>
>>
>>Tom Poterack
>>Moline, IL.
>>'49 Chevy Pickup Retro Rod
>>http://community.webtv.net/TOMPOT/TOMS1949CHEVYPICKUP
>>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|